Fujitsu 1FINITY L100 - Page 292

Table 50 (Cont.)
LED and Condion
LED Color Condion
E1 R Green Incoming opcal signal operang normally
Red LOS (lossOfSignal)
Yellow HREF (reeconTooHigh)
O Power o
UTL1,2 ACT Green Link up (without data communicaon/under data
communicaon)
O No link up
SPEED Green Linked 1000Base-T
O Linked 100Base-T
No link up
FAN 1, FAN 2, FAN 3 Green No error condion (normal operaon)
Red Error condion (fan failed, fan removed)
One of the following alarms is present:
■ equipmentFault
■ equipmentRemoved
Blinking red Fan mismatch (equipmentMismatchAributes)
O Power o
System Maintenance
Trouble Clearing
292
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only