Fujitsu 1FINITY L100 User Manual

Table 56 (Cont.)
Port PM Counters (BDL1-3R11)
Counter Enty Type
Fiber Type
(Capacity)
PM Type Locaon Direcon
Valid Operang
Range
spanLossVariaonMin Port (E1) NZ-DSF (Full) Metered NEND RX n/a
NZ-DSF
(Limited)
Metered NEND RX n/a
Table 57
Port PM Counters (PIL1-3PS2)
Counter Enty Type PM Type Locaon Direcon
Valid Operang
Range
opcalPowerReceive Port (E1…E4) Metered NEND RX –15.0…4.0
Port (C1…C16) Metered NEND RX –7.5…9.1
opcalPowerReceiveAvg Port (E1…E4) Metered NEND RX n/a
Port (C1…C16) Metered NEND RX n/a
opcalPowerReceiveMax Port (E1…E4) Metered NEND RX n/a
Port (C1…C16) Metered NEND RX n/a
opcalPowerReceiveMin Port (E1…E4) Metered NEND RX n/a
Port (C1…C16) Metered NEND RX n/a
opcalPowerTransmit Port (E1…E4) Metered NEND TX –9.0…12.0
Port (C1…C16) Metered NEND TX –14.2…9.9
opcalPowerTransmitAvg Port (E1…E4) Metered NEND TX n/a
Port (C1…C16) Metered NEND TX n/a
opcalPowerTransmitMax Port (E1…E4) Metered NEND TX n/a
Port (C1…C16) Metered NEND TX n/a
opcalPowerTransmitMin Port (E1…E4) Metered NEND TX n/a
Port (C1…C16) Metered NEND TX n/a
System Maintenance
Performance Monitoring Counters
359
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only

Fujitsu 1FINITY L100 Specifications

General

Brand	Fujitsu
Model	1FINITY L100
Category	Server
Language	English