Fujitsu 1FINITY L100 - Page 422

Step 11
Power down the replacement L100 Blade.
Step 12
Connect the USB ash drive containing the database to be restored to the replacement L100 Blade.
Step 13
Plug in all the bers and SFPs. Refer to Congure IP Connecon to DCN for more informaon.
Step 14
Power up the replacement L100 Blade.
Step Result:
The USB ash drive automacally updates the database in the replaced L100 Blade.
✓ This task is complete.
Addional Instrucons:
The user may need to do a rmware update or clear interconnect fails to the tributary blades.
System Maintenance
Backup and Restore
422
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only