Fujitsu 1FINITY L100 - Page 426

Warning: Because the surface of the module may be hot to touch, use cauon when removing the
module.
Step 6
Set the module aside for paperwork processing, if required.
Step 7
If a new module is to be installed in the same posion, follow the appropriate installaon procedure.
✓ This task is complete.
Addional Instrucons:
If the SFP module is replaced, record the serial number and issue number of the replacement module.
Equipment Removal
Remove SFP Module
426
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only