Fujitsu 1FINITY L100 - Page 451

Add Header—
Load Merge
Edit the conguraon le to add the header for load merge operaon.
Example:
<edit-config>
<default-operation>merge</default-operation>
<target>
<candidate/>
</target>
<test-option>set</test-option>
<config xmlns="http://tail-f.com/ns/config/1.0">
………… configuration saved in previous step, section 3.1
</config>
</edit-config>
Commit Changes
Save the changes.
Command:
<commit/>
Add Header—
Load Override
Edit the conguraon le to add the header for load override operaon.
Example:
<edit-config>
<default-operation>override</default-operation>
<target>
<candidate/>
</target>
<test-option>set</test-option>
<config xmlns="http://tail-f.com/ns/config/1.0">
………… configuration saved in previous step, section 3.1
</config>
</edit-config>
Commit Changes
Save the changes.
Command:
<commit/>
Load
Conguration Operation
Load Conguration Using NETCONF
451
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only