Fujitsu 1FINITY L100 - Page 459

Deleng protocols container to delete congured LLDP causes an error. In this release, this container is the only
protocols container and does not allow it to be deleted. The workaround is to disable LLDP explicitly and leave
the protocols container present.
Example:
<edit-config xmlns:lldp="urn:fujitsu:Params:xml:ns:yang:fujitsu-lldp"
message-id="1">
<target>
<candidate/>
</target>
<config>
<protocols xmlns="urn:fujitsu:params:xml:ns:yang:protocols">
<protocol>
<name>lldp</name>
<lldp-instance xmlns="urn:fujitsu:Params:xml:ns:yang:fujitsu-lldp">
<global-config>
<adminStatus>disable</adminStatus>
</global-config>
</lldp-instance>
</protocol>
</protocols>
</config>
</edit-config>
Load Conguration Operation
Limitations on Load Conguration
459
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only