CX2550/60/70 M4 Upgrade and Maintenance Manual 151
Expansion cards and OCP mezzanine cards
6.4.3.3 Concluding steps
Perform the following procedures:
Ê "Installing the riser module" on page 55
Ê "Installing the memory slot air duct (Air cooling only)" on page 64
Ê "Installing the server node in the server enclosure" on page 67
Ê Reconnect all external cables.
Ê "Controls and indicators on the server node" on page 448
Ê "Updating expansion card firmware" on page 83 (if applicable)
To Next Page
Loading...
Need help?
General