Fujitsu PRIMERGY CX2550 M4

94 Upgrade and Maintenance Manual CX2550/60/70 M4
Basic software procedures
Viewing the SEL using the iRMC web interface
Ê Log in to the ServerView iRMC web interface.
Ê Open the Logs menu.
Ê Click System Event Log to open the System Event Log page.
All events concerning the system are displayed in a table in the Event Log
Content group.
Ê You can sort the table based on a column using the arrows in the header
field.
Ê You can also filter the table using the filter lists in the header of some
columns.
I For more information on iRMC settings, see the iRMC user guides.
5.2.11.2 Clearing the SEL
You can clear the System Event Log (SEL) using the ServerView iRMC web
interface:
Ê Log in to the ServerView iRMC web interface.
Ê Open the Logs menu.
Ê Click System Event Log to open the System Event Log page.
All events concerning the system are displayed ina table in the Event Log
Content group.
Ê Click the Clear Logs button below the table to clear the SEL.
I For more information on iRMC settings, see the iRMC user guides.
5.2.12 Updating the NIC configuration file in a Linux and
VMware environment
In order to prevent errors caused by changing network device names (eth<x>),
it is recommended to store the MAC address (hardware address) of a network
interface card in the related NIC configuration file of the Linux/VMware OS.
When replacing a network controller or the system board with onboard LAN
controllers in a server running Linux/VMware OS, the MAC address will change
but not automatically be updated in the definition file.