CX2550/60/70 M4 Upgrade and Maintenance Manual 51
Basic hardware procedures
4.3 Removing the server node from the server
enclosure
V CAUTION!
● Shut down the server node and disconnect all external cables.
● Follow the safety instructions in the chapter "Important information"
on page 33.
● The server node bay must not be left open for more than 60 minutes.
Ê Remove the gasket of the lower
server node and keep it for later
use.
Ê Undo the locking mechanism
(1) of the release lever and pull
the server node out of the bay
(2).
Ê Install the gasket of the lower
server node again.
To Next Page
Loading...
