CX2550/60/70 M4 Upgrade and Maintenance Manual 73
Basic software procedures
5.1.2 Disabling the boot watchdog functionality of
ServerView Operations Manager
The ServerView Operations Manager boot watchdog determines whether the
server boots within a preset time frame. If the watchdog timer expires, the
system will automatically reboot.
5.1.2.1 Viewing boot watchdog settings
Viewing boot watchdog settings in the BIOS
Ê Enter the BIOS.
Ê Select the Management menu.
Ê Under Boot Watchdog settings, you can obtain more information about the
current watchdog status, time out intervals and actions that are triggered if
watchdog time outs are exceeded.
I For more information on BIOS settings, see the corresponding BIOS
Setup Utility reference manual.
Viewing boot watchdog settings in the iRMC web interface
Ê Log in to the ServerView iRMC web interface.
Ê Select the Settings menu.
Ê Open the Server Management page.
Ê Under Watchdog Settings, you can obtain more information about the
current watchdog status, time out intervals and actions that are triggered if
watchdog time outs are exceeded.
I For more information on iRMC settings, see the iRMC user guides.
Viewing boot watchdog settings in ServerView Operations Manager
Ê In ServerView Operations Manager Single System View select Maintenance
from the Information/Operation menu.
Ê Under ASR&R select the Watchdog tab to obtain more information about the
current watchdog status, time out intervals and actions that are triggered if
watchdog time outs are exceeded.
To Next Page
Loading...
Need help?
General