CX2550/60/70 M4 Upgrade and Maintenance Manual 155
Expansion cards and OCP mezzanine cards
6.4.5.3 Installing the new TFM
Ê Install the TFM onto the existing TFM spacer bolts, see section "Installing a
TFM" on page 140.
6.4.5.4 Concluding steps
Ê Install the SAS RAID controller, see section "Mounting a controller to the
riser module" on page 120.
Ê Connect the SAS cables to their original connectors on the SAS RAID
controller.
Ê "Installing the riser module" on page 55
Ê "Installing the memory slot air duct (Air cooling only)" on page 64
Ê "Installing the server node in the server enclosure" on page 67
Ê Reconnect all external cables.
Ê "Controls and indicators on the server node" on page 448
Ê "Updating expansion card firmware" on page 83 (if applicable)
To Next Page
Loading...
