CX2550/60/70 M4 Upgrade and Maintenance Manual 193
7.2.3 Concluding steps
Perform the following procedures:
Ê "Installing the memory slot air duct (Air cooling only)" on page 64
Ê Identify the correct memory slot according to the mounting order, see section
"Memory sequence" on page 185.
Ê "Installing the server node in the server enclosure" on page 67
Ê If applicable, reconnect all external cables.
Ê "Controls and indicators on the server node" on page 448
Ê "Updating or recovering the system board BIOS and iRMC" on page 77 (if
applicable)
Ê "Verifying the memory mode" on page 90 (if applicable)
Ê "Resetting the error status after replacing CPUs" on page 103
To Next Page
Loading...
