270 Upgrade and Maintenance Manual CX2550/60/70 M4
System board and components
9.1.4 Concluding steps
Perform the following procedures:
Ê Dispose of the CMOS battery in accordance with local regulations
concerning special waste.
Ê Install the right riser module, see section "Installing the riser module" on
page 55.
Ê "Installing the server node in the server enclosure" on page 67
Ê If applicable, reconnect all external cables.
Ê "Controls and indicators on the server node" on page 448
Ê "Verifying the system time settings" on page 92
To Next Page
Loading...
Need help?
General