BGS2T AT Command Set
10.3 AT^SIPS
BGS2T_ATC_V01.301 Page 250 of 554 1/31/12
c
“save“ Stores current profile(s) for given <type>.
If <ProfileId> is given only specific profile will be stored.
“load“ Loads current profile(s) for given <type>.
If <ProfileId> is given only specific profile will be loaded.
Internet connection or service profile storage identifier
0...9 In case of connection profile, max = 5, please see <conProfileId>.
In case of a service profile, max = 9, please see <srvProfileId>.
If parameter is omitted, AT^SIPS applies to all possible profile identifiers of
used <type>.
<ProfileId>
(num)
To Next Page
Loading...
