Honeywell E-Class Series - DK Darkness; DM Default Module; DR Delay Rate; DS Double Byte Symbol Set

DK Darkness
This command adjusts the length of the print head strobe to fine tune the HEAT
setting.
Parameter: DK
Value / Range: 1 - 64
Units / Interpretation: N/A
Command Equivalent: N/A
DM Default Module
See STX X Set Default Module for command details.
Parameter: DM
Value / Range: A, B, D, or G
Units / Interpretation: Module Letter
Command Equivalent: <STX>X
DR Delay Rate
This command sets the number of minutes to delay between multiple batch printings
of Quick Test Labels. This command is provided as a diagnostic tool.
Parameter DR
Value / Range: 0 - 120
Units / Interpretation: Seconds
Command Equivalent: N/A
DS Double Byte Symbol Set
See <STX>y or ySxx for command details.
Parameter: DS
Value / Range: 2-byte alpha character
Units / Interpretation: AA to ZZ printer resident symbol set ID
Command Equivalent: <STX>y, ySxx
EM Input Mode
This command determines the data processing mode:
DPL Command Reference
83