Parameter PT
Value / Range: 0 - 255
Units / Interpretation: N/A
Command Equivalent: N/A
PV Paper Value
This command sets threshold value for the media sensor’s “paper” parameter.
Parameter PV
Value / Range: 0 - 255
Units / Interpretation: N/A
Command Equivalent: N/A
PW Password Set
This command modifies the numeric password required to access the menu when
security is enabled.
If security is enabled, enter the new password followed by the old password (with no
spaces) in this form: XXXXXXXX.
Parameter PW
Value / Range: A – Z, 0 – 9
Units / Interpretation: Four characters (eight characters if security is
enabled).
Command Equivalent: N/A
Note: To be activated, the default password (0000) must be changed.
QQ Query Configuration
This command requires a parameter of either K or Q.
K causes the printer to respond with the Printer Key, used for generating Upgrade
Codes.
Q causes the printer to respond with the current configuration settings.
The <STX>Kc response command stream format is sent to the host computer via the
same port as the query containing all parameters controlled by the <STX>Kc
command, and may be used for restoring the printer's configuration or for configuring
other printers.
Parameter: QQ
112
DPLCommand Reference
To Next Page
Loading...
Need help?
General