<STX>WF
Printer response:
MODULE: D
S50 92244ttf50
AVAILABLE BYTES: 945152
MODULE: G
AVAILABLE BYTES: 852480
MODULE: X
AVAILABLE BYTES: 852480
MODULE: Y
AVAILABLE BYTES: 852480
Additional Information
Sample response if size and extension are specified:
<STX>Wse*
Printer response:
l
Module: D
l
testmsc.msc,13923 BYTES
l
Available Bytes: 22716K
l
Module: G
l
testfont1.dtt,95725 BYTES
l
testfont2.dbm,109400 BYTES
l
Available Bytes: 54912K
STX w Test Flash Memory Module
This command performs a system Flash Memory test. The time for each test will vary
from 20 to 120 seconds, depending upon the size of the module. All stored data will
be destroyed. If no module is present, there will be no printer response.
Syntax
<STX>wa
Parameters
Where:
l
a - Module designator (see Memory Module Identifiers and Allocations).
Sample
<STX>wa
26
DPLCommand Reference
To Next Page
Loading...
Need help?
General