Honeywell E-Class Series - Commands by Function

Commands by Function

Function Command
Backup speed pa
Batch quantity request <SOH>E
Cancel <SOH>C
Character bitmapped data <ESC>(snnnWdata
Character code <ESC>*cnnnE
Character dump mode <STX>P
Column offset amount Cnnnn
Configuration label and dot pattern print <STX>Z
Configuration Set <STX>Kc
Continuous paper length <STX>cnnnn
Count by ^nn
Cut <STX>o
Cut by :nnnn
Cut by cnn
Decrement alphanumerically <fii
Decrement numerically - fii
DIP switch, host controlled settings <STX>Vn
Dot size height and width Dwh
Edge sensor enable <STX>e
Feed rate <STX>Sa
Feedback characters enable <STX>a
Field data line terminator Tnn
File delete from module <STX>xmfname
Firmware version request <STX>v
Font descriptor <ESC>)snnnW
Font ID number <ESC>*cnnnD
Form feed <STX>F
Set Present Distance <STX>Kfnnnn
256
DPLCommand Reference