Honeywell E-Class Series User Manual

Printer Commands Description Notes
<STX>L Begin label
Existing label formats may
be recalled. Label header
records are not required.
D11 Label Header record
131100000500050Typical
text field 01
Label Formatting Data
record – Object type,
orientation, position, data
Q0001 Label Quantity
E Label Terminate record
<SOH>A Status command
Optional, bidirectional
communication required
for these commands.
<STX>U01new data for field
01
<STX>E0005
<STX>G
Reprint with New Data
Records
Used for fast reprints.
<STX>xImagename<CR>
<STX>zA
Memory cleanup
Typically used for
temporary storage.
Configuration Commands
The following table lists some commands useful in controlling printer configuration.
These commands are generally effective only for the current power-up session;
toggling power restores the default configuration. See STX Kc Configuration Set for
changes to the default power-up configuration. Changing the default power-up
configuration and saving objects in printer Flash memory can reduce the data
transmitted for each label and therefore improve throughput.
Configuration
Command
Name Function
<STX>A
Set Date and
Time
Sets Date and Time.
<STX>c
Set Continuous
Paper Length
Must be 0000 for gap media; not used for
reflective media.
<STX>e
Set Edge
Sensor
Sets sensing for gap or registration hole type
stock.
<STX>Kf
Set Present
Distance
Determines label stop position, head relative. STX
f Set Form Stop Position (Backfeed Command)
edge sensor relative equivalent command, older
models.
DPL Command Reference
5

Honeywell E-Class Series Specifications

General

Brand	Honeywell
Model	E-Class Series
Category	Printer
Language	English