Honeywell E-Class Series - STX Z Pack Module

l
Custom CR Char
l
Custom CNTBY Char
Limitations
Printed information will vary according to printer, model, firmware version, and
options.
STX z Pack Module
Ignored. This command causes the printer to reclaim all storage space associated
with all deleted files on the specified module (see STX X Set Default Module and STX x
Delete File from Module).
Syntax
<STX>zm
Parameters
Where:
l
m - The module identification character (see Memory Module Identifiers and Alloc-
ations).
DPL Command Reference
31