TABLE OF CONTENTS
Customer Support iii
Chapter 1 - DPL Command Reference 1
Control Code Command Functions 2
Attention-Getters 2
Easy Control Codes 2
Alternate Control Code Modes 2
Typical Data Flow Sequence 4
Status Commands 4
Configuration Commands 5
Download Commands 6
Label Header Commands 6
Chapter 2 - Immediate Commands 2
SOH # Reset 2
SOH * Reset 3
SOH A Send ASCII Status String 3
SOH a Send ASCII Extended Status String 4
SOH B Toggle Pause 6
SOH C Stop/Cancel 6
SOH D SOH Shutdown 6
SOH E Send Batch Remaining Quantity 7
SOH e Send Batch Printed Quantity 7
SOH F Send Status Byte 7
Chapter 3 - System Level Commands 9
STX A Set Time and Date 10
STX a Enable Feedback Characters 11
STX B Get Printer Time and Date Information 11
STX c Set Continuous Paper Length 12
STX E Set Quantity for Stored Label 13
STX e Select Edge Sensor 13
DPL Command Reference
v
To Next Page
Loading...
