Honeywell E-Class Series - W1 C Datamatrix Barcode with Byte Count Specifier

W1C DataMatrix Barcode with Byte Count Specifier
Label format barcode ID (W1C) to print a DataMatrix with Byte Count Specifier
barcode.
Syntax
W1C
Parameters
l
Byte Count
l
See Behavior section for details
Behavior
Specified Length – The upper case C identifies a DataMatrix barcode with a string 4-
digit length specifier. This allows values 0x00 through 0xFF to be included within the
data strings without conflicting with the DPL format record terminators. The four-digit
decimal data byte count immediately follows the four-digit column position field. This
value includes all of the data following the byte count field, but does not include itself.
Sample
<STX>L
D11<CR>
1W1C440000100010000292000000000Datamax<0x0D>prints best<CR>
121100000000100Barcode W1C<CR>
E
Result
Prints a W1c DataMatrix with Byte Count Specifier barcode.
From the example above, the barcode's data stream,
1W1C440000100010000292000000000 Datamax<0x0D>prints best, includes a Byte
Count Specifier (the portion in bold), where 0029 equals the four-digit decimal data
DPL Command Reference
213