Honeywell E-Class Series - LE Legacy Emulation; LM Label Store; LR Label Rotation; LS Language Select

LE Legacy Emulation
This command enables the <STX>O and <STX>f print positioning commands to allow
backward compatibility with label formats that were designed for the Allegro®
Prodigy®, and Prodigy Plus® (If the printer is Display-Equipped, also Prodigy Max®
emulation).
This command causes the printer to ignore Label commands A, M, n, and T.
Parameter LE
Value / Range: N, A, P, L, M, X
Units / Interpretation: N = None
A = Allegro
P = Prodigy
L = Prodigy Plus
M = Prodigy Max
X = XL
Command Equivalent: N/A
LM Label Store
This command selects the level of stored format recall to include the label-formatting
command fields, or the label-formatting command fields and the printer state.
Parameter: LM
Value / Range: F, S
Units / Interpretation: F = Fields, S = States & Fields
Command Equivalent: N/A
LR Label Rotation
This command sets label rotation, allowing formats to be flipped 180 degrees.
Parameter: LR
Value / Range: Y, N
Units / Interpretation: Y = Rotate 180, N = None
Command Equivalent: N/A
LS Language Select
This command selects the language for the menu system messages and
configuration label. Only languages that are resident will be available. (Language
name limited to a twenty character maximum.)
94
DPLCommand Reference