Honeywell E-Class Series - W1 G W1 G: USD-8 (Code 11) Barcode

Result
The variable length example encodes "AZTEC" with no ECI input, and 23% error
correction, and prints the barcode. A line of text is also printed.
Sample 2
<STX>L
D11
1W1F000000015010000170000AZTEC<0x0D>barcode
121100000000100Barcode W1F
E
Result
The specified length example includes a byte count field for all bytes that follow until
the end of the barcode data. The byte count is 17. The symbology encodes
"AZTEC<CR>barcode", and prints the barcode. Notice that a <CR> does not terminate
the barcode format record. A line of text is also printed.
W1g / W1G: USD-8 (Code 11) Barcode
Label format barcode ID to print a Telepen barcode with (W1G) or without (W1g)
human-readable text.
Syntax
W1G or W1g
Parameters
Bar Size
Behavior
l
Valid Characters: 0-9, -
l
Barcode Data String Length: Variable, typical max 41 characters
l
Human-readable: W1G; and, Non-human-readable: W1g
USD-8 (Code 11) is a barcode that encodes the ten digits and the dash (-) character.
An additional character serves as the start and stop indicator. Each character has
DPL Command Reference
225