Parameter: ES
Value / Range: Y, N
Units / Interpretation: Y = Enabled, N = Disabled
Command Equivalent: N/A
EV Empty Sensor Level
This command sets threshold value for the “Empty” media sensor parameter.
Parameter EV
Value / Range: 0 - 255
Units / Interpretation: N/A
Command Equivalent: N/A
FA Format Attribute
See the "An" command for details.
Parameter: FA
Value / Range: X, O, T
Units / Interpretation: X = XOR, O = Opaque, T = Transparent
Command Equivalent: An
FB Scalable Font Bolding
This command sets a bolding factor to fine tune scalable fonts, where one causes the
least amount of bolding and thirty-six the most (default value is 8).
Parameter FB
Value / Range: 1 - 36
Units / Interpretation: N/A
Command Equivalent: N/A
FE Font Emulation
This command allows font substitution for all internal fonts, allowing a new default
font to be defined without changing the host DPL data streams. Selecting a default
font that supports a desired character set could match with third party software to
print native characters without modifying the PC drivers.
In other words, match the PC font with the Printer Font then no interpretation would
be required by driver or printer. Depending on host drivers, the user may have to
disable Symbol Set commands and modify the Default Symbol set.
86
DPLCommand Reference
To Next Page
Loading...
Need help?
General