CODABLOCK is a two-dimensional, multi-row, stacked barcode. CODABLOCK A uses
the Code 39 character set and supports variable ratios. CODABLOCK E and F use the
Code 128 character set and support only fixed ratios, while CODABLOCK E also adds
FNC1 automatically to the beginning of the data.
Sample
<STX>L
D11
1W1q2202501000100E0040212345678
E
Result
Prints a CODABLOCK E barcode with 4 rows, 2 characters per row.
W1R UCC/EAN Code 128 K-MART NON EDI Barcode
Label format barcode ID (W1R) to print a Code 128 K-MART NON EDI barcode.
Syntax
W1R
Behavior
l
Valid Characters: 0-9
l
Length: 18 digits
l
Valid bar widths: The fourth character of record is the width of the narrow bar in
dots. All other bars are a ratio of the narrow bar (2, 3, or 4 times the narrow bar
width). Human-readable characters for this barcode are printed above the symbol.
This barcode produces the same symbology as barcode ID “R”, except that the
human-readable field has been modified to print underneath the barcode.
Sample
<STX>L
D11<CR>
1W1R0000000150100012345678901234567<CR>
121100000000100Barcode W1R<CR>
E
DPL Command Reference
241
To Next Page
Loading...
Need help?
General