The record (with spaces added for readability) conforms to the following fixed field
format. Identifying lower case letters have been placed below field values for
reference. For more information, see Format Record Structure.
1 2 1 1 000 0005 0005 HOME POSITION <CR>
a b c d eee ffff gggg [hhhh iiii] jj…j Termination character
Internal Bitmapped Fonts
This record type is used for internal bitmapped fonts.
When a 0 through 8 is entered in field b, then the height field eee is not used. The
bitmapped fonts include 8 different fonts (see Available Fonts – Sizes and
References).
Syntax
abcd eee ffff gggg jj...j <CR>
Parameters
Where:
Field Valid Inputs Meaning
a 1, 2, 3 and 4 Rotation
b 0 to 8 Font
c 1 to 9, A to Z, and a to z Width Multiplier
d 1 to 9, A to Z, and a to z Height Multiplier
eee 000 N/A
ffff 0000 to 9999 Row
gggg
0000 to 9999 Dependent
upon printer (see Print
Resolutions and Maximum
Width & Record Column
Values).
Column
jj...j
Valid ASCII character string
up to 255 characters,
followed by a termination
character.
Data
Smooth Font, Font Modules, and Downloaded Bitmapped Fonts
This record type is used for internal smooth fonts (CG Triumvirate) or a bitmapped
font downloaded to a memory module; see Font Loading Commands.
DPL Command Reference
164
To Next Page
Loading...
Need help?
General