STX Z Print Configuration Label
This command causes the printer to produce a Database Configuration Label. To
capture all printed information, use the labels as wide as the maximum print width
and at least four inches (102 mm) long (see Print Resolutions and Maximum Width &
Record Column Values).
Syntax
<STX>Z
Behavior
The printed configuration in configuration label will include both Printer
Configuration and DPL Configuration. The printer settings included in DPL
Configuration are as follows:
l
Default Module
l
Single Byte Symbol Set
l
Double Byte Symbol Set
l
Font Emulation
l
SCL Font Bold Factor
l
Format Attributes
l
Label Rotation
l
DPI Emulation
l
DPL Emulation
l
Column DPI Emulation
l
Row DPI Emulation
l
SOP Emulation
l
Label Store
l
Units of Measure
l
Column Adjust
l
Row Offset
l
Pause Mode
l
Use British Lbs
l
Feedback Characters
l
Control Code Sets
l
Custom SOH Char
l
Custom STX Char
30
DPLCommand Reference
To Next Page
Loading...
