Honeywell E-Class Series - BT Bluetooth Parameters

Parameter: BP
Value / Range: Y, N
Units / Interpretation: Y = Enabled, N = Disabled
Command Equivalent: N/A
BS or bS Backup Speed
This command controls the rate of label movement during backup positioning for
start of print, cutting or present distance.
Parameter BS or bS
Value / Range: Alpha character
Units / Interpretation: Model specific ranges (see Speed Ranges).
Command Equivalent: pa
BT Bluetooth Parameters
This command configures the Bluetooth Communication parameters.
Parameter BT
Value / Range: See table below.
Units / Interpretation: See table below.
Command Equivalent: N/A
Syntax
<stx>KcBT[nnn1,vvvv1:nnn2,vvvv2:…,nnnn,vvvvn:];
Parameters
Where:
l
nnni,vvvvi: - Configuration Item, Value pairs
l
nnni - Decimal Item Numbers from 1 to 9999
l
, - Decimal Item Number Delimiter
l
vvvvi - Item Value (syntax defined later)
l
: - Item Value Delimited terminated

Bluetooth parameters are defined in the following table.
76
DPLCommand Reference