DPL COMMAND REFERENCE
The Datamax Programming Language (DPL) is a feature-rich printer command
language designed to print labels, tags and receipts. This Command Reference is for
the version of DPL implemented in the printers listed below.
Supported Printers
Printer Model Use Printer Firmware
E-Class Mark III v9.04 or later
I-Class Mark II v10.04 or later
RL3e v18.06 or later
RL4e v18.06 or later
RP2 v19.07 or later
RP4 v19.07 or later
This document contains:
l
Configuration Commands
l
Extended System Level Commands
l
Font Loading Commands
l
Format Record Commands
l
Immediate Commands
l
Label Formatting Commands
l
System Level Commands
l
Extended System Level Commands
l
Symbol Sets
DPL Command Reference
1
CHAPTER
1
To Next Page
Loading...
