Honeywell E-Class Series - FH Fault Handling

Parameter FE
Value / Range: 0, 1, 2
Units / Interpretation: 0 = No Substitution
1 = Sub CG Times SA0
2 = Sub User S50
Command Equivalent: N/A
FH Fault Handling
This command determines the level of user intervention and the disposition of the
label being printed when a fault condition (ribbon out, media out, etc.) occurs.
Parameter: FH
Value / Range: L, D, R, B
Units / Interpretation: See table below.
Command Equivalent: N/A
DPL Command Reference
87