IMMEDIATE COMMANDS
When the printer receives an immediate command, its current operation will be
momentarily interrupted to respond to the command. Immediate commands may be
issued before or after system-level commands; however, they may not be issued
among label formatting commands or during font or image downloading.
Immediate commands consist of:
l
Attention-Getter, 0x01 or 0x5E (see Control Code Command Functions)
l
Command Character
The following immediate commands are available:
l
SOH # Reset
l
SOH * Reset
l
SOH A Send ASCII Status String
l
SOH a Send ASCII Extended Status String
l
SOH B Toggle Pause
l
SOH C Stop/Cancel
l
SOH D SOH Shutdown
l
SOH E Send Batch Remaining Quantity
l
SOH e Send Batch Printed Quantity
l
SOH F Send Status Byte
SOH # Reset
Returns all settings to last-saved settings, purges all current print jobs and clears
both the communications and print buffers. Also clears DRAM memory. This
command does not cause the printer to restart.
Syntax
<SOH>#
DPL Command Reference
2
CHAPTER
2
To Next Page
Loading...
Need help?
General