m
141100001000100SAMPLE LABEL
E
Result
The sample above prints the text (SAMPLE LABEL) starting at location coordinates
10.0 mm, 10.0 mm.
n Set Inch (Imperial) Mode
This command sets the printer to measure in inches. When this command is sent, all
measurements will change to inches. Default mode and menu selectable.
Syntax
n
Sample
<STX>L
n
141100001000100SAMPLE LABEL
E
Result
The sample above prints the text (SAMPLE LABEL) starting at location coordinates
1.0 inch, 1.0 inch.
P Set Print Speed
This command sets a print speed for a label or batch of labels. See Speed Ranges.
Syntax
Pa
Parameters
Where:
l
a - Is a single character representing a speed.
Sample
<STX>L
PC
141100001000100LABEL1
E
<STX>L
141100001000100LABEL2
E
DPL Command Reference
138
To Next Page
Loading...
