Honeywell E-Class Series - STX Ky Download Plug-In File; STX KZ Immediately Set Parameter

l
Y - verifier enable
l
N - verifier disable
Note: This command will result in a system reset for the EX2.
STX Ky Download Plug-in File
This command allows to download a plug-in file to the specified module from the host
to the printer. The data that immediately follows the command string will be plug-in
data.
Syntax
<STX>KymNamedata
Parameters
Where:
l
m - Valid Module ID – Range A to Z.
l
Name - Up to 16 characters used as plug-in file name.
l
data - Plug-in data.
Sample
<STX>KyXPlugin1data...data <CR>
Result
The sample instructs the printer to (1) receive Plug-in file data sent by the host, (2)
name the image “Plugin1”, and (3) store it in Module X (with a .dim file extension).
STX KZ Immediately Set Parameter
This command immediately sets the specified parameter.
Syntax
<STX>KZax<CR>
Parameters
Where:
l
a - Valid parameter identifier, as follows:
l
F - Feed Speed
l
P - Print Speed
65
DPLCommand Reference