Honeywell E-Class Series - C###E Character Code

Parameters
Where:
l
### - Is the number of bytes of font descriptor data from 1 to 3 ASCII decimal
digits.
l
dd...d - Is the descriptor.
*c###E Character Code
This code is the ASCII decimal value corresponding to the next downloaded character.
Syntax
<ESC>*c###E
Parameters
Where:
l
### -Is the ASCII value of the character, three digits maximum, 0 to 999.
(s#W Character Download Data
This command contains all of the information for one downloaded character.
Syntax
<ESC>(s###Wnn...n
Parameters
Where:
l
###-Is the number of bytes of bitmapped data, three digits maximum, from 1 to
999.
l
nn...n -Is the bitmapped data.
157
DPLCommand Reference