Honeywell E-Class Series User Manual

# Ezprint Name Value Type Description
45 CTC:LU:<value> User Name String
128 characters + 1 NULL terminated
char; Write ONLY attribute!
46 CTC:LH:<value> User Password String
128 characters + 1 NULL terminated
char; Write ONLY attribute!
47 CTC:LU2:<value> Pass Phrase String
63 characters + 1 NULL terminated
char; Write ONLY attribute!
48 CTC:W:1|2
WEP data
encryption
Unsigned char
1 = enable WEP data encryption
2 = allow WEP unencrypted traffic
(Default)
49 CTC:S:0|5|13
WEP AP
authentication
Unsigned char
Indicate the AP authentication
method via WEP. The value specifies
the WEP key length.
0 = open
5 = uses Shared Key 40- bit WEP key
13 = uses Shared Key 128-bit WEP
key
50 CTC:K:1|2|3|4
WEP Key
Selected
Unsigned char
Indicates which WEP key is currently
selected for WEP AP authentication,
if specified.
51 CTC:K1:<key value> WEP Key1 String
10 hexadecimal for 40-bit WEP key or
26 hexadecimal for 128-bit WEP key.
Upon on the returning from query,
this field will contains “0”, ”5”, or “13”
to specify the length of WEP key.
52 CTC:K2:<key value> WEP Key2 String
10 hexadecimal for 40-bit WEP key or
26 hexadecimal for 128-bit WEP key.
Upon on the returning from query,
this field will contains “0”, ”5”, or “13”
to specify the length of WEP key.
53 CTC:K3:<key value> WEP Key3 String
10 hexadecimal for 40-bit WEP key or
26 hexadecimal for 128-bit WEP key.
Upon on the returning from query,
this field will contains “0”, ”5”, or “13”
to specify the length of WEP key.
WIFI Settings
DPL Command Reference
105

Honeywell E-Class Series Specifications

General

Brand	Honeywell
Model	E-Class Series
Category	Printer
Language	English