Honeywell E-Class Series User Manual

[3] <CR> represents the line termination character as defined by the current control
code set or after use of Txx, line field terminator label format command.
If HEX/ASCII mode is selected in manual Data Input Mode, only the data for Kanji or
Binary data types will be converted, therefore the other data types and all command
characters must be entered in ASCII format. If HEX/ASCII is selected in automatic
Data Input Mode, all of the data must be entered in HEX/ASCII format.
Data Append Mode String Format, Manual Formatting – Barcode
W1D
D aa tt pp I
Where:
Field Valid Inputs Meaning
D D Data Append Mode String Format indicator
aa 00, 99 QR Code Number in Append Series, 2 decimal digits
tt The total number of QR Codes in series, 2 decimal digits
pp Value of Parity, 2 digits, 8 LSBs of data parity
e H, Q, M, L As above
m 0 – 8, none As above
i A, a, M, m As above
cdata
N, A, B, K
immediately followed by data
As above
term <CR>, <CR><CR> As above
Characteristics
Model 1 (original version), barcode versions 1 through 14:
l
A. ECC Levels "H", "M", "Q", and "L"
l
B. Mask Selection Automatic or 0 through 8
l
C. Data Input Modes Automatic and Manual
l
D. Data Append Mode
Model 2 (enhanced version), barcode versions 1 through 40
l
A. ECC Levels "H", "M", "Q", and "L"
l
B. Mask Selection Automatic or 0 through 8
l
C. Data Input Modes Automatic and Manual
l
D. Data Append Mode
DPL Command Reference
217

Honeywell E-Class Series Specifications

General

Brand	Honeywell
Model	E-Class Series
Category	Printer
Language	English