Honeywell E-Class Series - Reference Information

Supports six types: GS1 DataBar, DataBar Truncated, DataBar Stacked, DataBar
Stacked Omni-Directional, DataBar Limited, and DataBar Expanded.
Syntax
W1k
Parameters
See behavior section below.
Behavior
Valid Characters: Type dependent
Barcode Data String Length: Type dependent
GS1 DataBar is a continuous, linear symbology used for identification in EAN.UCC
systems. There are six different types:
GS1 DataBar Type Overview*
GS1 DataBar
GS1 DataBar Truncated
GS1 DataBar Stacked
GS1 DataBar Stacked Omni-Directional
l
Encodes a full 14-digit EAN.UCC item
identification within a linear symbol that
can be scanned omni-directionally.
l
The encodable character set is 0
through 9.
l
The maximum numeric data capacity is
the application identifier plus 14-digit
numeric item identification.
l
Error detection is mod 79 checksum.
GS1 DataBar Limited
l
Encodes a 14-digit EAN.UCC item iden-
tification with indicator digits of zero or
one within a linear symbol.
l
The encodable character set is 0
through 9.
l
The maximum numeric data capacity for
is the application identifier plus 14-digit
numeric item identification.
l
Data must begin with indicator 0 or 1.
Any higher number results in discarded
data.
l
Error detection is mod 89 checksum.
DPL Command Reference
231