STX Kc Configuration Set 37
STX KD Database Configuration 47
STX Kd Set File as Factory Default 49
STX KE Character Encoding 50
Character Encoding Syntax 51
STX KF Select Factory Defaults 52
STX Kf Set Present Distance 53
STX KH Dot Check 53
STX KI GPIO Input 55
STX Kn NIC Reset 55
STX KO GPIO Output 56
STX Kp Module Protection 56
STX Kr Resettable Counter Reset 57
STX KtA Write Application Family Identifier (AFI) to Tag 57
STX KtD Write Data Storage Format Identifier (DSFID) to Tag 58
STX KtE Write Electronic Article Surveillance (EAS) Bit 58
STX KtH Read and Feedback Tag Information to Host 59
STX KtR Read Data from RFID Tag 59
STX KtU Read Unique Serial Number from RFID Tag 60
STX KtW Write Data to RFID Tag 61
STX KuB Read Data from Gen2 Tag Section 62
STX KuF Send RFID Device Firmware Version 62
STX KuJ Write Data to Gen 2 Tag Section 62
STX KuR Read Data from RFID Tag 63
STX KuW Write Data to RFID Tag 64
STX KV Verifier Enable/Disable 64
STX Ky Download Plug-in File 65
STX KZ Immediately Set Parameter 65
Chapter 5 - Configuration Commands 67
AL Alignment Length 71
AS Single Byte Symbol Set 71
AV Avalanche Enabled Parameters 71
BA Backup After Print 75
BD Backup Delay 75
BL Backup Label 75
BP British Pound 75
BS or bS Backup Speed 76
BT Bluetooth Parameters 76
BZ Buzzer Enable 78
CC Control Codes 78
CE Cutter Equipped 79
DPL Command Reference
vii
To Next Page
Loading...
Need help?
General