Huawei Quidway S9300

interface GigabitEthernet1/0/0
port hybrid pvid vlan 30
port hybrid ubtagged vlan 30
#
interface GigabitEthernet2/0/0
port hybrid pvid vlan 40
port hybrid ubtagged vlan 40
#
interface LoopBack1
ip address 1.1.1.9 255.255.255.255
#
interface Tunnel1/0/0
ip binding vpn-instance vpn1
ip address 2.2.2.2 255.255.255.0
tunnel-protocol gre
source 50.1.1.2
destination 30.1.1.1
isis enable 50
#
bgp 100
peer 3.3.3.9 as-number 100
peer 3.3.3.9 connect-interface LoopBack1
#
ipv4-family unicast
undo synchronization
peer 3.3.3.9 enable
#
ipv4-family vpnv4
policy vpn-target
peer 3.3.3.9 enable
#
ipv4-family vpn-instance vpn1
import-route direct
import-route isis 50
#
ospf 10
area 0.0.0.0
network 1.1.1.9 0.0.0.0
network 110.1.1.0 0.0.0.255
#
ospf 20
area 0.0.0.0
network 50.1.1.0 0.0.0.255
#
return
l Configuration file of PE2
#
sysname PE2
#
vlan batch 40 50
#
ip vpn-instance vpn1
route-distinguisher 200:1
vpn-target 111:1 export-extcommunity
vpn-target 111:1 import-extcommunity
#
mpls lsr-id 3.3.3.9
mpls
lsp-trigger all
#
mpls ldp
#
isis 50 vpn-instance vpn1
network-entity 50.0000.0000.0003.00
import-route bgp
#
interface Vlanif40
ip address 110.1.1.2 255.255.255.0
mpls
2 GRE Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN
2-30 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2009-08-20)