EasyManua.ls Logo

Huawei Quidway S9300

Huawei Quidway S9300
567 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
---------------------------------------------------------------------
policy1 LSP 1
Run the display ip vpn-instance verbose command, and you can view the tunnel policy applied
to VPN instances. For example, in the following information, you can see that VPN instance
vpna uses tunnel policy policy1.
[Quidway] display ip vpn-instance verbose
Total VPN-Instances configured : 1
VPN-Instance Name and ID : vpna, 1
Create date : 2004/10/11 16:12:02
Up time : 0 days, 00 hours, 03 minutes and 07 seconds
Route Distinguisher : 100:1
Export VPN Targets : 100:1
Import VPN Targets : 100:1
Label policy: label per route
Tunnel Policy : policy1
The diffserv-mode Information is : uniform
The ttl-mode Information is : uniform
Interfaces : Vlanif10
Run the display ip routing-table vpn-instance verbose command, and you can view the tunnel
that transmits the VPN routes. The following is an example:
[Quidway] display ip routing-table vpn-instance vpnb 10.4.1.0 verbose
Routing Table : vpnb
Summary Count : 2
Destination: 10.4.1.0/30
Protocol: BGP Process ID: 0
Preference: 255 Cost: 0
NextHop: 2.2.2.2 Neighbour: 2.2.2.2
State: Active Adv GotQ Age: 01h02m27s
Tag: 0 Priority: 0
Label: 107520 QoSInfo:0x0
RelayNextHop: 0.0.0.0 Interface: Tunnel1/0/1
Tunnel ID: 0x10003
RelayNextHop: 0.0.0.0 Interface: Vlanif10
Tunnel ID: 0x10005
Run the display tunnel-info tunnel-id command, and you can obtain detailed information about
a specified tunnel.
[Quidway] display tunnel-info 0x10003
Tunnel ID: 0x10003
Tunnel Token: 7
Type: cr lsp
Destination: 3.3.3.3
Mask: 0.0.0.0
Out Slot: 1
Instance ID: 0
Interface: Tunnel1/0/1
Sub Tunnel ID: 0x0
1.5 Configuring the Tunnel Policy Applied to L2VPN
(Select-Sequence)
This section describes how to configure tunnel policies in select-sequence mode and how to
apply the tunnel policies to an L2VPN in SVC, Martini, or Kompella mode.
1.5.1 Establishing the Configuration Task
1.5.2 Configuring the Tunnel Policy
1.5.3 Applying the Tunnel Policy on VLL
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN 1 VPN Tunnel Management
Issue 03 (2009-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1-11

Table of Contents

Other manuals for Huawei Quidway S9300

Related product manuals