Huawei Quidway S9300

#
sysname UPE2
#
vlan batch 50 60
#
mpls lsr-id 5.5.5.9
mpls
#
mpls l2vpn
#
interface Vlanif50
ip address 100.1.4.2 255.255.255.0
mpls
#
interface Vlanif60
mpls static-l2vc destination 3.3.3.9 transmit-vpn-label 100 receive-vpn-label
100
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 50
port hybrid tagged vlan 50
#
interface GigabitEthernet2/0/0
port hybrid pvid vlan 60
port hybrid tagged vlan 60
#
interface LoopBack1
ip address 5.5.5.9 255.255.255.255
#
ospf 1
area 0.0.0.0
network 5.5.5.9 0.0.0.0
network 100.1.4.0 0.0.0.255
#
static-lsp ingress UPE2toSPE2 destination 3.3.3.9 32 nexthop 100.1.4.1 out-
label 40
static-lsp egress SPE2toUPE2 incoming-interface Vlanif 50 in-label 50
#
return
6.11.5 Example for Configuring Inter-AS Martini VPLS Option A
Networking Requirements
As shown in Figure 6-9, the Option A scheme is adopted to establish the inter-AS Martini VPLS.
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN 6 VPLS Configuration
Issue 03 (2009-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6-67