Huawei Quidway S9300

No. Data
2 OSPF process ID and router ID used by each service
3 Routes advertised by each OSPF process
3.9.2 Configuring the OSPF Multi-Instance on the PE
Context
Do as follows on the PE connected to the multi-VPN-instance CE.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
ospf process-id [ router-id router-id ] vpn-instance vpn-instance-name
The OSPF multi-instance is configured.
The OSPF process IDs vary according to the service types. The router IDs can be the same or
different.
Step 3 Run:
area area-id
The OSPF area view is displayed.
Step 4 Run:
network ip-address wildcard-mask
The IP address of the interface connecting to the multi-VPN-instance CE is advertised.
Step 5 Run:
quit
Return to the OSPF view.
Step 6 Run:
import-route bgp
The BGP route is imported.
Step 7 Run:
quit
Return to the system view.
Step 8 Run:
bgp as-number
The BGP view is displayed.
3 BGP/MPLS IP VPN Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN
3-38 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2009-08-20)