Huawei Quidway S9300

Example
Run the display bgp l2vpn command, and you can see that the next-hop address is the peer
address of the VC and the value of RD is correct. The following is an example:
<Quidway> display bgp l2vpn all
BGP Local router ID : 1.1.1.9, local AS number : 100
Origin codes:i - IGP, e - EGP, ? - incomplete
bgp.l2vpn: 1 destination
Route Distinguisher: 100:1
CE ID Label Offset Label Base nexthop pref as-path
2 0 25600 3.3.3.9 100
Run the display mpls l2vpn connection command, and you can see that the VPN name and the
RD are correct and the connection status is Up. The following is an example:
<Quidway> display mpls l2vpn connection
1 total connections,
connections: 1 up, 0 down, 0 local, 1 remote, 0 unknown
VPN name: vpn1,
1 total connections,
connections: 1 up, 0 down, 0 local, 1 remote, 0 unknown
CE name: ce1, id: 1,
Rid type status peer-id route-distinguisher intf
primary or not
2 rmt up3.3.3.9 100:1 Vlanif11
primary
Run the display mpls l2vpn [ l2vpn-name [ local-ce | remote-ce ] ] command, and you can see
that the RD and the VPN target are correct. The following is an example:
<Quidway> display mpls l2vpn vpn1
VPN name: vpn1, encap type: vlan, local ce number(s): 1, remote ce number(s): 1
route distinguisher: 100:1, MTU: 1500
import vpn target: 1:1,
export vpn target: 1:1,
remote vpn site(s) :
no. remote-pe-id route-distinguisher
1 3.3.3.9 100:1
Run the display mpls l2vpn { export-route-target-list | import-route-target-list } command,
and you can see that the VPN target is correct. The following is an example:
<Quidway> display mpls l2vpn import-route-target-list
import vpn target list: 744:7 745:7 746:7 888:8
4.9 Configuring VLL FRR
After the VLL FRR is configured, L2VPN traffic is rapidly switched to the backup path when
a fault occurs on the master path. After the fault on the master path is rectified, the L2VPN traffic
is switched back to the master path according to the revertive switchover policy.
4.9.1 Establishing the Configuration Task
4.9.2 (Optional) Configuring the Revertive Switchover Policy
4.9.3 Checking the Configuration
4 VLL Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN
4-28 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2009-08-20)