Huawei Quidway S9300

6.8.3 Checking the Configuration
Prerequisite
The inter-AS Kompella VPLS configurations are complete.
Procedure
l Run the display bgp vpls { group [ group-name ] | peer [ ip-address ] } command to check
the BGP VPLS peer (group) relationship on a PE or an ASBR-PE.
l Run the display bgp vpls all command to check BGP VPLS label blocks on a PE or an
ASBR-PE.
l Run the display vpls connection [ bgp | vsi vsi-name ] [ down | up ] [ verbose ] command
to check the VPLS connection on a PE.
----End
Example
After the configurations, run the display bgp vpls peer command on a PE or an ASBR-PE. You
can find that the status of the BGP VPLS peer relationship between the PE and the ASBR-PE
in the same AS is Established. For example:
<Quidway> display bgp vpls peer
BGP local router ID : 1.1.1.1
Local AS number : 100
Total number of peers : 1 Peers in established state : 1
Peer V AS MsgRcvd MsgSent OutQ Up/Down State
PrefRcv
4.4.4.4 4 200 5 8 0 00:02:04 Established 0
Run the display bgp vpls all command on a PE or an ASBR-PE, and you can view information
about VPLS label blocks on the ASBR-PE. For example:
<Quidway> display bgp vpls all
BGP Local Router ID : 1.1.1.1, Local AS Number : 100
Status codes : * - active, > - best
BGP.VPLS : 2 Label Blocks
--------------------------------------------------------------------------------
Route Distinguisher: 100:1
SiteID Offset NextHop Range LabBase TunnelID FromPeer MHPref
--------------------------------------------------------------------------------
> 1 0 0.0.0.0 5 25600 0x0 0.0.0.0 0
--------------------------------------------------------------------------------
Route Distinguisher: 200:1
SiteID Offset NextHop Range LabBase TunnelID FromPeer MHPref
--------------------------------------------------------------------------------
*> 2 0 4.4.4.4 5 25600 0x0 4.4.4.4 0
Run the display vpls connection command on a PE or an ASBR-PE, and you can find that the
status of the VPLS connection is up on the PE or the ASBR-PE. For example:
<Quidway> display vpls connection
1 total connections,
connections: 1 up, 0 down, 0 ldp, 1 bgp
6 VPLS Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN
6-30 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2009-08-20)