EasyManua.ls Logo

Huawei Quidway S9300

Huawei Quidway S9300
567 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
peer { group-name | peer-address } reflect-client
The RR and its client are configured.
5. Run:
undo policy vpn-target
The received VPN targets of the L2VPN label blocks are not filtered.
6. (Optional) Run:
rr-filter extended-list-number
The reflecting policy is configured for the RR.
----End
4.6.7 Checking the Configuration
Prerequisite
The configurations of the Kompella VLL are complete.
Procedure
l Run the display bgp l2vpn { all | group [ group-name ] | peer [ [ peer-ip-address ]
verbose ] | route-distinguisher route-distinguisher [ ce-id ce-id [ label-offset label-
offset ] ] } command to view the BGP information about the Kompella VLL.
l Run the display mpls l2vpn connection [ vpn-name [ remote-ce ce-id | down | up |
verbose ] | summary | interface interface-type interface-number ] command to view
information about the Kompella VLL.
l Run the display mpls l2vpn [ l2vpn-name [ local-ce | remote-ce ] ] command to view the
L2VPN information about the PE.
l Run the display mpls l2vpn { export-route-target-list | import-route-target-list }
command to view the route target list of the L2VPN.
----End
Example
Run the display bgp l2vpn command, and you can see that the next-hop address is the peer
address of the VC and the value of RD is correct. The following is an example:
<Quidway> display bgp l2vpn all
BGP Local router ID : 1.1.1.9, local AS number : 100
Origin codes:i - IGP, e - EGP, ? - incomplete
bgp.l2vpn: 1 destination
Route Distinguisher: 100:1
CE ID Label Offset Label Base nexthop pref as-path
2 0 25600 3.3.3.9 100
Run the display mpls l2vpn connection command, and you can see that the VPN name and the
RD are correct and the connection status is Up. The following is an example:
<Quidway> display mpls l2vpn connection
1 total connections,
connections: 1 up, 0 down, 0 local, 1 remote, 0 unknown
CE name: ce1, id: 1,
Rid type status peer-id route-distinguisher interface
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN 4 VLL Configuration
Issue 03 (2009-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4-23

Table of Contents

Other manuals for Huawei Quidway S9300

Related product manuals