interface Vlanif50
ip address 40.1.1.2 255.255.255.0
mpls
mpls ldp
#
interface Vlanif60
mpls l2vc pw-template pwt 200
#
interface GigabitEthernet1/0/0
port link-type trunk
port trunk allow-pass vlan 50
#
interface GigabitEthernet2/0/0
port link-type trunk
port trunk allow-pass vlan 60
#
interface LoopBack0
ip address 5.5.5.9 255.255.255.255
#
ospf 1
area 0.0.0.0
network 5.5.5.9 0.0.0.0
network 40.1.1.0 0.0.0.255
#
return
l Configuration file of CE2
#
sysname CE2
#
vlan batch 60
#
interface Vlanif60
ip address 100.1.1.2 255.255.255.0
#
interface GigabitEthernet1/0/0
port link-type trunk
port trunk allow-pass vlan 60
#
return
5.11.4 Example for Configuring a Mixed MH-PW
Networking Requirements
U-PE1 and U-PE2 are connected through the MPLS backbone network.
You need to create a mixed MH-PW between U-PE1 and U-PE2 with the S-PE as the switching
node.
5 PWE3 Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN
5-66 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2009-08-20)
To Next Page
Loading...
Need help?
General
