Huawei Quidway S9300

#
ospf 1
area 0.0.0.0
network 3.3.3.9 0.0.0.0
network 20.1.1.0 0.0.0.255
network 30.1.1.0 0.0.0.255
#
return
l Configuration file of P2
#
sysname P2
#
vlan batch 40 50
#
mpls lsr-id 4.4.4.9
mpls
#
mpls ldp
#
interface Vlanif40
ip address 30.1.1.2 255.255.255.0
mpls
mpls ldp
#
interface Vlanif50
ip address 40.1.1.1 255.255.255.0
mpls
mpls ldp
#
interface GigabitEthernet1/0/0
port link-type trunk
port trunk allow-pass vlan 40
#
interface GigabitEthernet2/0/0
port link-type trunk
port trunk allow-pass vlan 50
#
interface LoopBack0
ip address 4.4.4.9 255.255.255.255
#
ospf 1
area 0.0.0.0
network 4.4.4.9 0.0.0.0
network 30.1.1.0 0.0.0.255
network 40.1.1.0 0.0.0.255
#
return
l Configuration file of U-PE2
#
sysname U-PE2
#
vlan batch 50 60
#
mpls lsr-id 5.5.5.9
mpls
#
mpls l2vpn
#
pw-template pwt
peer-address 3.3.3.9
control-word
vccv cc cw cv lsp-ping
#
mpls ldp
#
mpls ldp remote-peer 3.3.3.9
remote-ip 3.3.3.9
#
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN 5 PWE3 Configuration
Issue 03 (2009-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5-65