EasyManua.ls Logo

Huawei Quidway S9300

Huawei Quidway S9300
567 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
primary or not
----------------------------------------------------------------------------
2 rmt up 3.3.3.9 100:1 Vlanif11
primary
Run the display mpls l2vpn [ l2vpn-name [ local-ce | remote-ce ] ] command, and you can see
that the RD and the VPN target are correct. The following is an example:
<Quidway> display mpls l2vpn vpn1
VPN name: vpn1, encap type: vlan, local ce number(s): 1, remote ce number(s): 1
route distinguisher: 100:1, MTU: 1500
import vpn target: 1:1,
export vpn target: 1:1,
remote vpn site(s) :
no. remote-pe-id route-distinguisher
1 3.3.3.9 100:1
Run the display mpls l2vpn { export-route-target-list | import-route-target-list } command,
and you can see that the VPN target is correct. The following is an example:
<Quidway> display mpls l2vpn import-route-target-list
import vpn target list: 744:7 745:7 746:7 888:8
<Quidway> display VLL export-route-target-list
export vpn target list: 755:7 888:8
4.7 Configuring Inter-AS Martini VLL
If the MPLS backbone network bearing the Martini VLL extends over multiple ASs, you can
adopt the multi-hop scheme.
4.7.1 Establishing the Configuration Task
4.7.2 Configuring Inter-AS Option A
4.7.3 Checking the Configuration
4.7.1 Establishing the Configuration Task
Applicable Environment
If the MPLS backbone network bearing the Martini VPLS extends over multiple ASs, you must
configure the inter-AS Martini VLL.
l Inter-AS Option A: This solution can be easily implemented. When the number of inter-
AS Martini VLL routes on ASBRs is small, Option A is recommended.
Pre-configuration Tasks
Before configuring inter-AS Martini VLL, complete the following tasks:
l Configuring static routes or IGP on the PE or P on the MPLS backbone network of ASs to
implement the IP connectivity of the devices in the same AS
l Configuring the basic MPLS capability on the MPLS backbone network of each AS
l Configuring MPLS LDP and establishing LDP LSP for the MPLS backbone
4 VLL Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN
4-24 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2009-08-20)

Table of Contents

Other manuals for Huawei Quidway S9300

Related product manuals