Huawei Quidway S9300

--- 10.4.1.1 ping statistics ---
5 packet(s) transmitted
0 packet(s) received
100.00% packet loss
----End
Configuration Files
l Configuration file of PE1
#
sysname PE1
#
vlan batch 10 20 30
#
ip vpn-instance vpna
route-distinguisher 100:1
vpn-target 111:1 export-extcommunity
vpn-target 111:1 import-extcommunity
ip vpn-instance vpnb
route-distinguisher 100:2
vpn-target 222:2 export-extcommunity
vpn-target 222:2 import-extcommunity
#
mpls lsr-id 1.1.1.9
mpls
#
mpls ldp
#
interface Vlanif10
ip binding vpn-instance vpna
ip address 10.1.1.2 255.255.255.0
#
interface Vlanif20
ip binding vpn-instance vpnb
ip address 10.2.1.2 255.255.255.0
#
interface Vlanif30
ip address 172.1.1.1 255.255.255.0
mpls
mpls ldp
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 10
port hybrid untagged vlan 10
#
interface GigabitEthernet2/0/0
port hybrid pvid vlan 20
port hybrid untagged vlan 20
#
interface GigabitEthernet3/0/0
port hybrid pvid vlan 30
port hybrid untagged vlan 30
#
interface LoopBack1
ip address 1.1.1.9 255.255.255.255
#
bgp 100
peer 3.3.3.9 as-number 100
peer 3.3.3.9 connect-interface LoopBack1
#
ipv4-family unicast
undo synchronization
peer 3.3.3.9 enable
#
ipv4-family vpnv4
policy vpn-target
peer 3.3.3.9 enable
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN 3 BGP/MPLS IP VPN Configuration
Issue 03 (2009-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3-65